Start an IoT prototype with one measurement

Build a small test that reveals whether a sensor can answer the question you care about.

IoT · · 1 min read

Start with a question the device should answer. If the goal is to tell whether a room stays within a temperature range, collect temperature readings before choosing a dashboard or a network protocol. Write down where the sensor will sit, how often to sample, and what difference would change a decision.

Capture the raw readings

Log a timestamp and the raw reading together. Compare a short run against a reference instrument in the same location, then move the sensor and repeat. A steady difference can indicate a calibration issue. Sudden jumps may come from placement, airflow, power, or a dropped sample. Keep the raw values so you can revisit those possibilities later.

Disconnect on purpose

Unplug the network while the prototype is collecting. Check whether it records readings locally, reports the gap, or loses them silently. Decide how much data the application can afford to lose before spending time on retries. A small prototype should leave you with evidence about the measurement and a concrete requirement for the next iteration.